PSR-S710/PSR-S910
18
16-4
PNCA Circuit Board
(Time required: About 13 minutes)
16-4-1 Remove the LANL circuit board. (See procedure 7.)
16-4-2 Remove the DJK circuit board. (See procedure 11.)
16-4-3 Remove the LCD assembly. (See procedure 16-3-2.)
16-4-4 Remove the twelve (12) screws marked [570K]. The
PNCA circuit board can then be removed. (Fig. 7)
16-5
PNCB Circuit Board
(Time required: About 10 minutes)
16-5-1 Remove the keyboard assembly. (See procedure 13.)
16-5-2 Remove the eight (8) screws marked [570L]. The
PNCB circuit board can then be removed. (Fig. 8)
17. Tweeter
(PSR-S710)
(Time required: About 8 minutes)
17-1
Remove the lower case assembly. (See procedure 1.)
17-2
Remove the two (2) screws marked [140J]. The tweeter
can then be removed. (Fig. 8)
*
The left and right tweeters can be removed in the
same method.
18. Tweeter
(PSR-S910)
(Time required: About 8 minutes)
18-1
Remove the lower case assembly. (See procedure 1.)
18-2
Remove the two (2) screws marked [150]. The tweeter
can then be removed. (Fig. 8)
*
The left and right tweeters can be removed in the
same method.
19. Woofer
(PSR-S710)
(Time required: About 8 minutes)
19-1
Remove the lower case assembly. (See procedure 1.)
19-2
Remove the four (4) screws marked [60A]. The woofer
can then be removed. (Fig. 10)
*
The left and right woofers can be removed in the
same method.
20. Woofer
(PSR-S910)
(Time required: About 8 minutes)
20-1
Remove the lower case assembly. (See procedure 1.)
20-2
Remove the four (4) screws marked [60B]. The woofer
and four (4) speaker holders can then be removed.
(Fig.
10)
*
The left and right woofers can be removed in the
same method.
21.
Speaker Grille Assembly (L)
(Time required: About 10 minutes)
21-1
Remove the lower case assembly. (See procedure 1.)
21-2
Remove the shield cover U together with the DML
circuit board (PSR-S710) or DMH circuit board
(PSR-S910). (See procedure 11-2)
21-3
Remove the EIF circuit board. (See procedure 12.)
21-4
Restraighten the eight (8) projections marked [A] to
come off the slots of the upper case assembly. (Fig. 8)
21-5
Remove the speaker grille assembly (L). (Fig. 3)
<Bottom view>
• LCD ASSEMBLY (PSR-S710)
<Bottom view>
• LCD ASSEMBLY (PSR-S910)
CRYSTAL DISPLAY
CRYSTAL DISPLAY
LCD FIXTURE L
LCD FIXTURE R
ADHESIVE TAPE
FILAMENT TAPE
[LC40B]
[LC40A]
[LC40B]
[LC40A]
[LC40B]
[LC40A]
LCD FIXTURE L
BL CONNECTOR ASSEMBLY
LCD CONNECTOR ASSEMBLY
FFC CABLE
LCD FIXTURE R
EL ADHESIVE TAPE
EL ADHESIVE TAPE
[LC40B]
[LC40A]
Fig. 9
[LC40]: BIND HEAD TAPPING SCREW-B
3.0X6 MFZN2W3 (WE936300)
Note: Do not tighten the screws marked [LC40A] and [LC40B] with excessive force when assembling the LCD assembly.
Содержание PSR-S710
Страница 41: ...41 PSR S710 PSR S910 AM Circuit Board Pattern side Scale 85 100 AM 2NA WQ86250 ...
Страница 43: ...43 PSR S710 PSR S910 Pattern side DML Circuit Board PSR S710 DML 2NA WQ78560 ...
Страница 45: ...45 PSR S710 PSR S910 DMH Circuit Board PSR S910 Pattern side DMH 2NA WQ26320 Scale 90 100 ...