PSR-S710/PSR-S910
12
* Disassembly or assembly should be performed on a cloth so as not to damage the LCD.
* Install the fi lament tape and the harness clamp in the same way as they were before removal.
* MAC (Media Access Control) address is stored in the DML circuit board (PSR-S710) and DMH circuit board (PSR-S910).
When the DML circuit board or DMH circuit board is replaced, MAC address will be changed.
* Notes on Flat Cable
Contacts are visible from the back. Pay attention not to insert and install the
cable to the connector inversely. (Photo 1)
DISASSEMBLY PROCEDURE
Photo 1
Precautions
Front Side
Back Side
1.
Lower Case Assembly
(Time required: About 8 minutes)
1-1
Remove the twenty-eight (28) screws marked [100].
The two bottom boards can then be removed. (Fig. 1)
1-2
Remove the eight (8) screws marked [110],
fi
ve (5)
screws marked [120], two (2) screws marked [130A]
and two (2) screws marked [130B]. The lower case
assembly can then be removed. (Fig. 1)
2.
HP Circuit Board
(Time required: About 8 minutes)
2-1
Remove the lower case assembly. (See procedure 1.)
2-2
Remove the three (3) screws marked [140A]. The HP
circuit board can then be removed. (Fig. 2)
[100] x 14
BOTTOM BOARD
LOWER CASE ASSEMBLY
[100] x 14
[110]
[110]
[110]
[120]
[120]
[110]
[110]
[130A]
[130B]
[110]
<Bottom view>
[100]: BIND HEAD TAPPING SCREW-B 4.0X16 MFZN2W3 (WF15410R)
[110]: BIND HEAD TAPPING SCREW-B 3.0X12 MFZN2W3 (WE98740R)
[120]: BIND HEAD TAPPING SCREW-B 3.0X16 MFZN2W3 (WE97340R)
[130]: BIND HEAD TAPPING SCREW-B 3.0X30 MFZN2W3 (WF49100R)
Fig. 1
Содержание PSR-S710
Страница 41: ...41 PSR S710 PSR S910 AM Circuit Board Pattern side Scale 85 100 AM 2NA WQ86250 ...
Страница 43: ...43 PSR S710 PSR S910 Pattern side DML Circuit Board PSR S710 DML 2NA WQ78560 ...
Страница 45: ...45 PSR S710 PSR S910 DMH Circuit Board PSR S910 Pattern side DMH 2NA WQ26320 Scale 90 100 ...