Making the Connections
11
ProMix 01 Getting Started Guide
Making the Connections
1. Connect your sound source to input channel 9.
It seems more logical to connect to input channel 1. But since inputs
1 through 8 use XLR-type connectors, and it’s doubtful whether
you’re going to yell into a microphone for both tutorials, we’ll use
input channel 9. If you’re using a stereo sound source, connect to
input channel 10 as well. A stereo source is not essential, and for most
of the tutorial it’s probably easier to work with just one channel.
2. Connect the MONITOR OUTs to your power amplifier’s inputs.
If you’re using headphones, connect them to the PHONES jack.
3. Plug ProMix 01 into a suitable AC receptacle.
Power ON/OFF
This section explains how to power ProMix 01 ON and OFF.
Power ON
Always power on your system in the following order: signal source
devices through to power amplifier.
Press the POWER switch on the rear panel to power ON ProMix 01.
The ProMix 01 start-up screen appears for a few seconds, the faders
initialize themselves, then the screen that was used when ProMix 01
was last powered off appears.
Power OFF
Always power off your system in the following order: power amplifier
through to signal source devices.
Press the POWER switch on the rear panel to power OFF ProMix 01.
All mix settings, mix scenes, and other data is stored when ProMix 01
is powered OFF.
Warning:
Before making any connections, make sure that all your
equipment is powered OFF.
Warning:
ProMix 01 should be connected only to an AC receptacle of
the voltage type marked on its rear panel.
POWER
ON
OFF
