Yamaha PortaTone PSR-7000 Скачать руководство пользователя страница 104

Страница: 104 / 174

100

The

LISTEN

LCD button which appears when

the

SONG LIST

is selected can be used to listen to

the currently selected song — press

LISTEN

again

to stop playback when done.

When the user or song file to be renamed has

been selected, press the

EXECUTE

LCD button.

The following display will appear.

Disk Operations

Song file names can be up to 12 characters long

and user file names can be up to 8 characters long.
Use the

< >

LCD dial to move the name cursor to

the various character positions, then use the

A~Z

0~9…

LCD dial to select the required character for

each position. The

A~Z

LCD dial selects capital

letters and the

0~9…

LCD dial selects numbers

and special characters. When a song file is selected
the “

a~z

” LCD dial is also available for lower-case

character entry.

When the file and file name have been specified,

press the

YES

LCD button to actually begin the

rename operation (or press the

LCD button to

cancel the operation). “Don’t remove disk” will
appear while the file is being renamed.

NOTES

• User file names which already exist cannot be entered.

Содержание PortaTone PSR-7000















































































































































































Результаты поиска

Содержание PortaTone PSR-7000

Отзывы:

Yamaha PortaTone PSR-7000, Руководство пользователя, Страница: 104 / 174

Результаты поиска

Содержание PortaTone PSR-7000

Отзывы: