Yamaha Portatone PSR-5700, Уполномоченное руководство по продукции

Страница: 95 / 140

[F2] Reverb, Effect
The PSR-5700 has 23 reverb-based effects and 9 other effects that can be selected via the four
pages accessed by this function. The selected reverb and effect types are applied to the sound
when the [EFFECT] and [REVERB] buttons are used (see page 37 in the Getting Started manual).
1 REVERB TYPE
Purpose:
Selects the reverb effect to be applied when the
[REVERB] button is turned on (see page 37 of the “Getting
Started” manual).
Procedure:
The right [-] and [+] buttons step through the reverb list
effect by effect. For faster selection you can use the left [-]
and [+] buttons to directly select the reverb categories —
Reverb, Delay, etc. — and then use the right [-] and [+] but-
tons to select the desired reverb effect within that category.
2 REVERB DEPTH
The Reverb Effects are:
1. Reverb : Hall 13.TempoSync : Short
2. Reverb : Room 14. TempoSync : Long
3. Reverb : Plate
15. Echo : Stereo
4. Reverb : Church
16. Echo
5. Reverb : Club
: PingPong
6. Reverb : Stage
17. Refl&Gate : Panned
7. Reverb : Bathroom
18. Refl&Gate : Early
8. Reverb : Metal
19. Refl&Gate : Gate
9. Delay : Short
20. Delay&Rev : Single
10. Delay : Medium
21. Delay&Rev : DelayL/R
11. Delay : Long
22. Variation : Distort.
12. Delay : OneShot
23. Variation : Tunnel
Notes:
The “TempoSync” effects produce a delay that is synchro-
nized to the currently selected tempo. “Variation : Distort”
produces a distortion effect.
Try out all of the effects to get a feel for what they can do
to your sound.
Purpose:
Independently sets the depth of the selected reverb effect
for the rhythm, bass, chord 1, chord 2, orchestra 1, and or-
chestra 2 sound.
Procedure:
Use the and buttons to select the parameter for
which reverb depth is to be adjusted (R = rhythm; B = bass;
Cl = chord 1; C2 = chord 2; O1 = orchestra 1; O2 = orches-
tra 2), and use the [-] and [+] buttons to set the reverb depth
for each parameter. Pressing the [-] and [+] buttons simulta-
neously instantly recalls the default depth value.
Notes:
Reverb depth can be adjusted in 7 steps, represented by a
vertical bar to the right of each parameter. The longer the
bar, the greater the reverb depth.
35