Yamaha Portatone PSR-5700, Уполномоченное руководство по продукции

Страница: 106 / 140

[F5] Disk
2 TO DISK
Purpose:
Saves the data listed in “Notes:,” below, to a floppy disk
inserted into the PSR-5700 disk drive.
Procedure:
With the underline cursor located under the file number
parameter at the left of the lower display line (use the
button to move the cursor if necessary), use the left [-] and
[+] buttons to select the number of the file to save (00 —
99). If a file with the selected number already exists on the
disk, the name of the selected file will be displayed to the
right of the number (if no name has been assigned,
“N_FILE” will appear), and the size of the file in kilobytes
(approximate) will be shown on the upper display line. New
files have a “0” size. The cursor can be moved to the various
character positions (8 characters maximum) in the file name
by using the and buttons, and the name can be ed-
ited by selecting the appropriate characters for each position
via the left [-] and [+] buttons.
3 RENAME FILE
When the file number has been specified, press the right
[-] and [+] buttons under “-YES-” on the display simultane-
ously to execute the save operation. “Don’t remove disk”
will appear while the data is being saved. “Completed!” will
appear when the data has been successfully saved.
Notes:
The following data are saved to disk when the save opera-
tion is executed:
• Instrument setup (condition) data.
• Disk style data.
• Custom voice data.
• Custom accompaniment data.
• Voice registration data.
• Panel registration data.
• Super style play data.
• Pad data.
• Sequencer song data.
All data is saved in one operation. Specific data types can
not be saved individually.
See page 48 for a list of error messages that may appear
during disk save.
The PSR-5700 identifies and handles disk files by number
rather than the file name. If you save to a file number that
already contains data, the original data will be erased and
rep/aced by the new data.
Purpose:
Allows the name of the file having the specified file
number to be changed as required.
Procedure:
[Space]!#$%&'()0123456789@
ABCDEFGHIJKLMNOPQRSTUVWXYZ^_{}
With the underline cursor located under the file number
parameter at the left of the lower display line (use the
button to move the cursor if necessary), use the left [-] and
[+] buttons to select the number of the file (00 — 99). The
current name of the selected file will be displayed to the
right of the number, and the size of the file in kilobytes (ap-
proximate) will be shown on the upper display line. The
cursor can be moved to the various character positions in the
46
file name and the name edited by selecting the appropriate
characters for each position via the left [-] and [+] buttons.
When the new file name has been entered, press the right
[-] and [+] buttons under “-YES-” on the display simultane-
ously to register the new name. “Completed!” will appear
when the new name has been successfully registered.
Character List
Notes:
This function lets you change the name of a file without
having to re-load and then re-save the entire file with a new
name.
Since the PSR-5700 uses the file number rather than the
file name to recognize and manage data files, a file saved
with the same number as another file will overwrite that file
even if it has a different name.