62
MIDI Data Format
1.6 Channel aftertouch
This message conveys the pressure after the key is played on the keyboard (for an
entire MIDI channel). The pressure can be controlled for each part. This message
will affect the notes currently playing.
The effect of this message can be modified by the following parameters.
* Multi Part Parameter
1. CAT PITCH CONTROL
2. CAT FILTER CONTROL
3. CAT AMPLITUDE CONTROL
4. CAT LFO PMOD DEPTH
5. CAT LFO FMOD DEPTH
6. CAT LFO AMOD DEPTH
By default, there will be no effect.
If the Multi Part parameter Rcv CHANNEL AFTER TOUCH = OFF, that part
will not receive Channel Aftertouch.
CAT AMPLITUDE CONTROL is processed on the host device (e.g., MOTIF,
MU128, 9000Pro, etc.)
2. System exclusive messages
2.1 Parameter changes
This device uses the following parameter changes.
[ UNIVERSAL REALTIME MESSAGE ]
1) Master Volume
[ UNIVERSAL NON REALTIME MESSAGE ]
1) General MIDI System On
[ XG PARAMETER CHANGE]
1) XG System on
2) XG System parameter change
3) Multi Part parameter change
[ PLG150-DR/PLG150-PC NATIVE PARAMETER CHANGE ]
1. PLG150-DR/PLG150-PC NATIVE CURRENT VOICE parameter change
2. PLG150-DR/PLG150-PC NATIVE USER VOICE parameter change
3. PLG150-DR/PLG150-PC NATIVE MULTI PART parameter change
[ OTHER MESSAGE ]
1) Master tuning
2.1.1 Universal realtime messages
2.1.1.1 Master Volume
11110000
F0H
= Exclusive status
01111111
7FH
= Universal Real Time
01111111
7FH
= ID of target device
00000100
04H
= Sub-ID #1=Device Control Message
00000001
01H
= Sub-ID #2=Master Volume
*
0sssssss
SSH
= Volume LSB
0ttttttt
TTH
= Volume MSB
11110111
F7H
= End of Exclusive
or
11110000
F0H
= Exclusive status
01111111
7FH
= Universal Real Time
0xxxnnnn
XNH
= Device Number, xxx = don’t care
00000100
04H
= Sub-ID #1=Device Control Message
00000001
01H
= Sub-ID #2=Master Volume
0sssssss
SSH
= Volume LSB
0ttttttt
TTH
= Volume MSB
11110111
F7H
= End of Exclusive
When received, the Volume MSB is reflected in the System Parameter MAS-
TER VOLUME.
* The binary expression
0sssssss
is expressed in hexadecimal as SSH.
The same applies elsewhere.
2.1.2 Universal non-realtime messages
2.1.2.1 General MIDI System On
11110000
F0H
= Exclusive status
01111110
7EH
= Universal Non-Real Time
01111111
7FH
= ID of target device
00001001
09H
= Sub-ID #1=General MIDI Message
00000001
01H
= Sub-ID #2=General MIDI On
11110111
F7H
= End of Exclusive
or
11110000
F0H
= Exclusive status
01111110
7EH
= Universal Non-Real Time
0xxxnnnn
XNH
= N:Device Number, X:don’t care
00001001
09H
= Sub-ID #1=General MIDI Message
00000001
01H
= Sub-ID #2=General MIDI On
11110111
F7H
= End of Exclusive
When this message is received, the SOUND MODULE MODE is set to XG,
and all data except for MIDI Master Tuning will be restored to the default
value.
Since approximately 50ms is required to process this message, be sure to
allow an appropriate interval before sending the next message.
2.1.3 XG Parameter Change
This message sets XG-related parameters. Each message can set a single
parameter.
The message format is as follows.
11110000
F0H
Exclusive status
01000011
43H
YAMAHA ID
0001nnnn
1NH
N:device Number
01001100
4CH
Model ID
0ggggggg
GGH
Address High
0mmmmmmm
MMH
Address Mid
0lllllll
LLH
Address Low
0sssssss
SSH
Data
:
:
11110111
F7H
End of Exclusive
For parameters whose Data Size is 2 or 4, the appropriate amount of data will
be transmitted as indicated by Size.
2.1.3.1 XG System On
11110000
F0H
Exclusive status
01000011
43H
YAMAHA ID
0001nnnn
1NH
N:device Number
01001100
4CH
Model ID
00000000
00H
Address High
00000000
00H
Address Mid
01111110
7EH
Address Low
00000000
00H
Data
11110111
F7H
End of Exclusive
When ON is received, the SOUND MODULE MODE changes to XG.
Since approximately 50ms is required to process this message, be sure to
allow an appropriate interval before sending the next message.
2.1.3.2 XG System parameter change
This message sets the XG SYSTEM block (see Tables <1-1> and <1-2>).
2.1.3.3 Multi Part parameter change
This message sets the Multi Part block (see Tables <1-1> and <1-3>).
2.1.3.4 Part Assign parameter change
This message sets the PART ASSIGN block (see Tables <1-1> and <1-4>).
2.1.4 PLG150-DR/PLG150-PC Native parameter change
This message sets parameters unique to the PLG150-DR/PLG150-PC.
Each message sets a single parameter. The message format is as follows.
11110000
F0H
Exclusive status
01000011
43H
YAMAHA ID
0001nnnn
1NH
N:Device Number
01100111
67H
Model ID
0ggggggg
GGH
Address High
0mmmmmmm
MMH
Address Mid
0lllllll
LLH
Address Low
0sssssss
SSH
Data
:
:
11110111
F7H
End of Exclusive
For parameters whose Data Size is 2 or 4, the appropriate amount of data will
be transmitted as indicated by Size.
2.1.4.1 PLG150-DR/PLG150-PC NATIVE CURRENT VOICE parameter change
This message sets the PLG150-DR/PLG150-PC NATIVE CURRENT
VOICE block (see Tables <2-1> and <2-2>).
2.1.4.2 PLG150-DR/PLG150-PC NATIVE USER VOICE parameter change
This message sets the PLG150-DR/PLG150-PC NATIVE USER VOICE
block (see Tables <2-1> and <2-3>).
2.1.4.3 PLG150-DR/PLG150-PC NATIVE MULTI PART parameter change
This message sets the PLG150-DR/PLG150-PC NATIVE MULTI PART
block (see Tables <2-1> and <2-4>).
2.1.5 Other parameter change messages
2.1.5.1 Master Tuning
This message changes the pitch of all channels simultaneously.
11110000
F0H
Exclusive status
01000011
43H
YAMAHA ID
0001nnnn
1NH
N:device Number
00100111
27H
Model ID
00110000
30H
Address High
00000000
00H
Address Mid
00000000
00H
Address Low
0000mmmm
0MH
Master Tune MSB
0000llll
0LH
Master Tune LSB
0xxxxxxx
XXH
don’t
care
11110111
F7H
End of Exclusive
In general, use the Master Tune parameter in XG System (see Table <1-2>).
plg150drpc̲e̲3.fm のコピー Page 62 Friday, May 24, 2002 5:16 PM
Содержание PLG150-DR
Страница 1: ......
