Yamaha PLG150-AN Скачать руководство пользователя страница 13

Страница: 13 / 93

Operations /

Recording Within the AN Expert Editor

Click “OK.”

Set recording-standby.

Click “Edit” on the menu bar, then select “

Record

.” Alternately, click on the

Record

button

in the toolbar.

Start recording on the host applications.

Edit the AN parameters as desired.

Any edits you make within the AN Expert Editor are recorded in real time, as you

make them. You can even record voice changes in real time.

Stop recording on the host applications.

Exit from recording-standby.

Click “Edit” on the menu bar, then select “Record.” Alternately, click on the Record

button in the toolbar.

Play back the song.

Use the Play Control window to return to the beginning of the track and start play-

back. Further edits can be recorded (overdubbed) to the same track by re-selecting

the AN Expert Editor window and repeating steps #4 - #8 above.

• If you’re not satisfied with the recorded result, the last recording you’ve done can be canceled

using the Undo function in the Edit menu (keyboard shortcut: Ctrl + Z).

Содержание PLG150-AN






























































































Результаты поиска

Содержание PLG150-AN

Отзывы:

Похожие инструкции для PLG150-AN

Бренды по названию

Популярные бренды

Yamaha PLG150-AN, Руководство пользователя

Результаты поиска

Содержание PLG150-AN

Отзывы:

Похожие инструкции для PLG150-AN

Бренды по названию

Популярные бренды