8-13
1FSJPEJDNBJOUFOBODFBOEBEKVTUNFOU
7.
ll with the speci
d amount of
the recommended engine oil, and
then install and tighten the oil ller
cap.
5*1
Be sure to wipe off spilled oil on any
parts after the engine and exhaust sys-
tem have cooled down.
NOTICE
ECA24060
.BLF TVSF UIBU OP GPSFJHO NBUFSJBM
FOUFSTUIFDSBOLDBTF
8. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
9. Turn the engine off, and then
check the oil level and correct it if
necessary.
10. Reset the oil change tripmeter and
oil change indicator “OIL”.
5JHIUFOJOHUPSRVF
Engine oil drain bolt A:
20 N·m (2.0 kgf·m, 15 lb·ft)
Engine oil drain bolt B:
32 N·m (3.2 kgf·m, 24 lb·ft)
3FDPNNFOEFEFOHJOFPJM
See page 10-1.
0JMRVBOUJUZ
0.90 L (0.95 US qt, 0.79 Imp.qt)
EAU67821
'JOBMUSBOTNJTTJPOPJM
The nal transmission case must be
checked for oil leakage before each
ride. If any leakage is found, have a
Yamaha dealer check and repair your
motorcycle. In addition, the nal trans-
mission oil must be changed as follows
at the intervals speci ed in the periodic
maintenance and lubrication chart.
1. Start the engine and warm up the
nal transmission oil by riding the
motorcycle for several minutes.
2. Stop the engine and then place
the motorcycle on the center-
stand.
3. Place an oil pan under the nal
transmission case to collect the
used oil.
4. Remove the
al transmission oil
ler cap and its O-ring from the -
nal transmission case.
Содержание NMAX GPD155 2020
Страница 1: ...GPD155 08 3 4 6 3FBE UIJT NBOVBM DBSFGVMMZ CFGPSF PQFSBUJOH UIJT WFIJDMF GPD155 08 3 4 6 ...
Страница 92: ......