8-11
1FSJPEJDNBJOUFOBODFBOEBEKVTUNFOU
5PJOTUBMMUIFTQBSLQMVH
1. Clean the surface of the spark
plug gasket and its mating sur-
face, and then wipe off any grime
from the spark plug threads.
2. Install the spark plug with the
spark plug wrench, and then tight-
en it to the speci ed torque.
5*1
If a torque wrench is not available
when installing a spark plug, a good
estimate of the correct torque is 1/4–
1/2 turn past nger tight. However, the
spark plug should be tightened to the
speci ed torque as soon as possible.
3. Install the spark plug cap.
5*1
Install the spark plug cap so that it is
positioned as shown in the illustration
and the spark plug lead does not con-
tact any surrounding parts.
4. Install the panels.
5JHIUFOJOHUPSRVF
Spark plug:
13 N·m (1.3 kgf·m, 9.6 lb·ft)
1. Spark plug cap
2. Spark plug lead
1
2
EAU66993
&OHJOFPJMBOEPJMTUSBJOFS
The engine oil level should be checked
before each ride. In addition, the oil
must be changed and the oil strainer
cleaned at the intervals speci ed in the
periodic maintenance and lubrication
chart.
5PDIFDLUIFFOHJOFPJMMFWFM
1. Place the vehicle on the center-
stand. A slight tilt to the side can
result in a false reading.
2. Start the engine, warm it up for
several minutes, and then turn it
off.
3. Wait a few minutes until the oil set-
tles, remove the engine oil ller
cap, wipe the engine oil dipstick
clean, insert it back into the oil l-
er hole (without screwing it in), and
then remove it again to check the
oil level.
8"3/*/(5IFNVG FS
BOE NV
S QSPUFDUPS CFDPNF
WFSZ IPU EVSJOH VTF 5P BWPJE
QPTTJCMF CVSOT MFU UIF NVG FS
BOE QSPUFDUPS DPPM CFGPSF SF
NPWJOHUIFPJM MFSDBQ
[EWA17810]
Содержание NMAX GPD155 2020
Страница 1: ...GPD155 08 3 4 6 3FBE UIJT NBOVBM DBSFGVMMZ CFGPSF PQFSBUJOH UIJT WFIJDMF GPD155 08 3 4 6 ...
Страница 92: ......