Yamaha NMAX 155, Руководство пользователя

Страница: 40 / 108

Instrument an d control functions
6-7
6
To reset both the tripmeter and the in-
dicator, select the V-belt replacement
tripmeter, and then push the “MENU”
switch until “V-BELT” and the tripme-
ter start flashing. While “V-BELT” and
the tripmeter are flashing, push the
“MENU” switch until the tripmeter is
reset.
TIP
When the V-belt is replaced, the trip-
meter and indicator must be reset.
Otherwise, the V-belt replacement in-
dicator will not come on at the correct
time.
EAU86940
Instantaneous fuel consumption
d isplay
This display shows fuel consumption
under current riding conditions. It can
be set to either “km/L” or “L/100 km”,
or “MPG” when using miles.

“km/L”: the distance that can be
traveled on 1.0 L of fuel.

“L/100 km”: the amount of fuel
necessary to travel 100 km.

“MPG”: the distance that can be
traveled on 1.0 Imp.gal of fuel.
TIP
When traveling under 10 km/h (6 mi/h),
“_ _._” is displayed.
EAU86950
Avera g e fuel consumption d isplay
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either “km/L” or “L/100
km”, or “MPG” when using miles.

“km/L”: the average distance that
can be traveled on 1.0 L of fuel.

“L/100 km”: the average amount
of fuel necessary to travel 100 km.

“MPG”: the average distance that
can be traveled on 1.0 Imp.gal of
fuel.
TIP

To reset the display, push the
“MENU” switch until it resets.

After resetting, “_ _._” is shown
until the vehicle has traveled some
distance.
1. Instantaneous fuel consumption display
1
1. Average fuel consumption display
1
UB1TE0E0.book Page 7 Monday, September 9, 2019 4:44 PM