MX49/MX61 Reference Manual
52
Up to six Controller Sets can be assigned to each Voice. Select a Set from Sets 1 – 6 by using the Cursor [
u
]/[
d
]
buttons, then press [ENTER]. The Controller Set display is called up.
Determines the Voice name for the User Voice.
Voice Ctrl Set (Voice Controller Set)/
DrumKit Ctrl Set (Drum Voice Controller Set)
Parameter
Description
Source
Determines which controller is to be assigned and used for the selected Controller Set.
Settings:
PB (Pitch Bend wheel), MW (Modulation wheel), AS1 (ASSIGN 1), AS2 (ASSIGN 2), FS
(Footswitch), FC1 (Foot controller 1), FC2 (Foot Controller 2), BC (Breath controller), RB (Ribbon Controller),
AF1 (ASSIGNABLE FUNCTION [1]), AF2 (ASSIGNABLE FUNCTION [2]), AT (Aftertouch)
NOTE
When the foot switch is set to a Control Change number of 96 or higher in the Controller display of the Utility,
the footswitch will not be available as a “Source” of the Controller Set for the selected Voice.
Dest
(Destination)
Determines the function that is controlled by the controller set in “Source.”
Settings:
See the “Control List” in the “Data List” PDF document.
Depth
Determines the degree to which the Source controller affects the Destination.
Settings:
-64 – +0 – +63
Setting examples of the Destination
Here are some specific useful examples on how to set the “Dest” (Destination) assignments.
To control the volume:
Volume
To change the speed of the Rotary Speaker:
Insertion Effect Parameter 1 (INSA:EfSpCtl)
*1
To apply a wah pedal effect to the Voice:
Insertion Effect Parameter 1 (INSA:EfPdCtl )
*2
Concerning *1 and *2 respectively, the following settings are necessary in addition to the above settings.
*1 Also set Effect type = “Rotary Sp” in the Voice Insert Eff/ DrumKit Insert Eff display of Voice Edit
*2 Also set Effect type = “VCM Pedal Wah” in the Voice Insert Eff/ DrumKit Insert Eff display of Voice Edit
Voice Name /DrumKit Name
Parameter
Description
Voice name
Determines the Voice name which is assigned to the selected Part. Move the cursor to the desired location
by using the Cursor [<]/[>] buttons, and select the character by using the [DATA] dial. The names can
contain up to 10 alphabetic and numeric characters.
Category
(Voice category)
Determines the category to which the Voice will be registered. The categories are keywords representing
the general characteristics of the Voices. Selecting the appropriate category makes it easy to find the
desired Voice from the huge variety of Voices available.
Settings:
For Normal Voice: AP, KB, ORG, GTR, BAS, STR, BRS, WND, LD, PAD, CMP, CP, SFX, MFX, ETH
For Drum Voice: DR
NOTE
For details about each category, refer to “Voice Category” of “Basic Structure” (
).
