Yamaha MU10, Добро пожаловать в руководство

Страница: 8 / 12

13
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Setting Up Your MU10
■
Using Batteries
To use the MU10 on battery power,
remove the battery compartment cover
(as shown at the right) and insert six
1.5V AA size (SUM-3, R-6 or equiva-
lent) manganese or alkaline batteries
in the battery compartment. Make
sure to follow the polarity indications
on the bottom case.
Securely replace the battery compart-
ment cover when finished installing
the batteries.
■
When to Replace the Batteries
When the battery power runs too low to properly operate the MU10, the
POWER lamp will flash slowly. When this happens, replace all batteries
with a complete set of six new batteries of the same type.
■
CAUTION
●
NEVER mix old and new batteries or different types of batteries! Also, to
prevent possible damage due to battery leakage, remove the batteries from the
instrument if it is not to be used for an extended period of time.
●
The MU10 has no memory backup function. Turning the power off will auto-
matically initialize all settings and parameter values.