Yamaha MU10, Добро пожаловать в руководство

Страница: 12 / 12

17
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Setting Up Your MU10
Connecting to Audio Equipment
In order to hear the sounds of the MU10, you must connect it to a set of
stereo headphones or an amplifier/speaker system. Connect the headphones
or audio cable to the stereo mini jack on the side panel. The particular cable
that you use depends on your audio equipment. (In most cases this would be
a stereo mini/dual RCA-pin cable or a stereo mini/stereo mini cable.)
MIN MAX VOLUME LINE OUT/
PHONES
TONE VOLUME
LOW HIGH
POWER
ON/ OFF
TONE VOLUME
LOW HIGH
POWER
ON/ OFF
INPUT
Stereo mini
INPUT
Audio equipment
MIN MAX VOLUME LINE OUT/
PHONES
Stereo
mini
■
CAUTION
●
After making connections, turn down the volume controls on all devices,
then turn on the power of each device in the following order:
1) External MIDI device or computer
2) MU10
3) Audio equipment
When turning off the power, simply reverse the order. This is done to
avoid damaging any of the equipment and connected speakers (as well as
your ears!).