Yamaha MTT890, Руководство пользователя

Страница: 55 / 338

Instrument and control functions
4-33
4
Spring preload of the shock absorb-
er assembly
WARNING
EWA10222
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.

Do not tamper with or attempt
to open the cylinder assembly.

Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.

Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.

Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
Turn the adjusting knob in direction (a)
to increase the spring preload.
Turn the adjusting knob in direction (b)
to decrease the spring preload.
To set the spring preload, turn the ad-
juster in direction (b) until it stops, and
then count the clicks in direction (a).
TIP
When turning the spring preload ad-
juster in direction (b), the 0 click posi-
tion and the 1 click position may be the
same.
1. Spring preload adjusting knob
Spring preload setting:
Minimum (soft):
1 click(s) in direction (a)
Standard:
11 click(s) in direction (a)
Maximum (hard):
24 click(s) in direction (a)
(a) (a)
(b) (b)
1
EAU84680
Luggage strap holders
Use the indicated strap points to se-
cure luggage ties to the vehicle.
1. Luggage strap holder
11