Yamaha MTT890, Руководство пользователя

Страница: 54 / 338

Instrument and control functions
4-32
4
EAU46833
Handlebar position
The handlebar can be adjusted to one
of two positions to suit the rider’s pref-
erence. Have a Yamaha dealer adjust
the position of the handlebar.
1. Handlebar
1
EAU92782
Adjusting the front and rear
suspension
This model is equipped with an elec-
tronically controlled suspension damp-
ing system (KADS). See pages 3-4,
4-13 for more information on KADS
and SUS-MODE.
TIP
After any service to the rear suspen-
sion, a sensor calibration must be per-
formed via the settings MENU. See
page 4-21 for more information on
SUS. Sensor Calibration.
Spring preload of the front fork
WARNING
EWA10181
Always adjust both fork legs equally,
otherwise poor handling and loss of
stability may result.
NOTICE
ECA27260
Use extra care to avoid scratching
the anodized finish when making
suspension adjustments.
Turn the adjusting nut in direction (a) to
increase the spring preload.
Turn the adjusting nut in direction (b) to
decrease the spring preload.
To set the spring preload, turn the ad-
juster in direction (b) until it stops, and
then count the turns in direction (a).
1. Spring preload adjusting nut
Spring preload setting:
Minimum (soft):
0 turn(s) in direction (a)
Standard:
2 turn(s) in direction (a)
Maximum (hard):
10 turn(s) in direction (a)
11
11
11
(a) (a)
(b) (b)