Yamaha MT8X, Руководство по эксплуатации

Страница: 34 / 49

1. Connections
Make connections as figured on the right.
Before connections, be sure to turn OFF
the power to all equipments.
2. Turning the power ON/Setting the tape
Set the all output level controls to minimum, and turn the power ON to the rhythm machine and then to this unit. At
this time, leave all controls or faders set to "0" or "MIN".
Insert a tape into the cassette compartment and run the tape forward. Stop the tape after about 20 seconds, and
press the COUNTER RESET button to reset the tape counter to "00:00".
3. Recording the Rhythm Parts
Setting the controls and switches on the mixer
By following the contents of the PLANNING SHEET, set them for channels 3, 5 and 6 as follows. Be sure to set
the channel faders for other channels to "0".
Set faders 1 , 2 and 3 for the CUE LEVEL controls at 7 - 8.
Connections/Operations
GAIN control
Equalizer control
AUX control
ASSIGN switch
PAN control
Input selector switch
Channel fader
H I G H
M I D
L O W
A U X 1
A U X 2
1 / 2
3 / 4
Channel 3
LINE
0
0
0
0
0
off
ON
L/ODD
MIC/LINE
7-8
Channel 5
LINE
0
0
0
0
0
ON
off
L/ODD
LINE
7-8
Channel 6
LINE
0
0
0
0
0
ON
off
R/EVEN
LINE
7-8
Setting the controls and switches on the MASTER section
Set the AUX RTN ASSIGN switches to off, and the MASTER fader to "0".
GROUP MASTER control
MONITOR SELECT switch
MONITOR/PHONES control
GROUP 1
GROUP 2
GROUP 3
GROUP 4
GROUP 1/3
GROUP 2/4
STEREO
2TR IN
CUE
7-8
7-8
7-8
0
off
off
off
off
ON
Center
33