background image

MRX7-D Owner’s Manual

5

Backup battery

• Do not replace the backup battery by yourself. Doing so 

may cause an explosion and/or damage to the device(s).
When the backup battery is running low, the [PRESET] 
display indicates “12.” In this case, contact your Yamaha 
dealer and have qualified Yamaha service personnel 
replace the backup battery.

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.

Handling and Maintenance

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the device, 

TV, or radio may generate noise.

• Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car 

during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components.

• Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel.
• When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wip-

ing cloths.

• Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved from one 

location to another, or air conditioning is turned on or off, for example. Using the device while condensation is present can cause dam-
age. If there is reason to believe that condensation might have occurred, leave the device for several hours without turning on the 
power until the condensation has completely dried out.

• When turning on the AC power in your audio system, always turn on the power amplifier LAST, to avoid speaker damage. When turn-

ing the power off, the power amplifier should be turned off FIRST for the same reason.

• Always turn the power off when the device is not in use.

Saving data

This device has a built-in backup battery that maintains data in internal memory even when the device’s power is switched off. The backup 
battery will eventually become depleted, however, and when that happens the contents of the internal memory will be lost.* To prevent loss 
of data be sure to replace the backup battery before it becomes fully depleted. If the backup battery runs low, alert number “12.” will appear 
in the [PRESET] display either while the unit is starting up. If this occurs, do not turn off the power, but immediately save the data to a com-
puter or other external storage device, and then have qualified Yamaha service personnel replace the backup battery. The average life of 
the internal backup battery is approximately five years, depending on operating conditions.

* Data items maintained in the internal memory by the backup battery are as follows:

• Contents of the current preset and the preset number
• Parameters specific to the unit (e.g., configuration data)
• Current parameters for peripheral devices within the same system
• Event log

Data items other than those described above are stored in memory that does not require backup power, and will be retained even if the 
backup battery fails.

Information

 About this manual

• The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your 

device.

• Windows is a registered trademark of Microsoft ® Corporation in the United States and other countries.
• SDHC Logo and SD Logo are trademarks of SD-3C, LLC.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
• Software may be revised and updated without prior notice.

(weee_eu_en_02)

Yamaha cannot be held responsible for damage caused 
by improper use or modifications to the device, or data 
that is lost or destroyed.

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic 
products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accor-
dance with your national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative 
effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste 
disposal service or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities 
or dealer and ask for the correct method of disposal.

PA_en_5  2/2

Содержание MRX7-D





































Отзывы: