Yamaha MOXF6, Руководство пользователя

Страница: 68 / 80

68
MOXF6/MOXF8 Owner’s Manual
Appendix

Have any or all of the Elements’ Insertion Effect Output parameters been set to “thru” in the effect setting display in the Voice Edit
mode?

Have any or all of the effect types been set to “thru” or “No Effect”?

When this occurs in the Performance mode/Song mode/Pattern mode, check whether the Insertion Switch (INS SW) parameters are
set properly or not.
The Edit Indicator appears, even when parameters are not being edited.

Keep in mind that even though the Edit mode is not active, simply moving a Knob/Slider or playing back the Song/Pattern changes the
current Voice, Performance, or Mixing, causing the Edit Indicator to appear.
Cannot start the Arpeggio.

Check whether the ARP [ON/OFF] button is turned on or off.

When a User Arpeggio type is selected, does the currently selected Arpeggio actually contain data?

Are the Arpeggio related parameters such as Note Limit and Velocity Limit set appropriately?

When this situation occurs in the Performance/Song/Pattern mode, check the Arpeggio Switch parameter.
If this parameter for the current Part is set to off, Arpeggio playback will not be triggered by your keyboard performance even if the
ARP [ON/OFF] button is turned on.

Is the MIDI Sync parameter set to “internal” or “auto” (using internal clock)?
Cannot stop the Arpeggio.

When Arpeggio playback does not stop even if you release the key, set the Arpeggio Hold parameter to “off.”
The Voice assigned to the Performance produces a different sound from the one in the Voice mode.

This is normal because the Voice sound is determined by the parameter settings in the Performance mode.
To solve this problem, you will need to apply the same parameter settings as those used in the Voice mode via the following three
steps.
1. Set the “P.WithVce” (Parameter With Voice) parameter to “on” for a certain Part then reselect the same Voice. The settings of some
Voice Common parameters will be applied to the Performance Part.
2. Execute the Voice Copy Job in the Performance Job mode.
This Job copies the System Effect, Master Effect and Master EQ settings in the Voice mode to the Performance Common
parameters.
3. Set the Reverb Send Level and Chorus Send Level to the desired value (same as in the Voice mode) manually.
The Song/Pattern cannot be started even when pressing the [
F
] (Play) button.

Does the selected Song or Pattern (phrase) actually contain data?

Is the [DAW REMOTE] button turned on?

Is the MIDI Sync parameter set to “internal” or “auto” (using internal clock)?
[VOICE]

[F6] EFFECT

[SF1] CONNECT

“EL: OUT 1-8”
[PERFORM]

[F6] EFFECT

[SF2] INS SW
[SONG]/[PATTERN]

[MIXING]

[F3] EFFECT

[SF2] INS SW
[VOICE]

ARP [EDIT]

[F4] LIMIT
[PERFORM]

ARP [EDIT]

[F4] LIMIT
[SONG]/[PATTERN]

ARP [EDIT]

[F4] LIMIT
[PERFORM]

ARP [EDIT]

[F3] MAIN

Part selection

“Switch”
[SONG]/[PATTERN]

ARP [EDIT]

[F3] MAIN

Part selection

“Switch”
[UTILITY]

[F5] MIDI

[SF3] SYNC

“MIDI Sync” = “auto” or “internal”
[VOICE]

ARP [EDIT]

[F3] MAIN

“Hold”
[PERFORM]

ARP [EDIT]

[F3] MAIN

Part selection

“Hold”
[SONG]/[PATTERN]

ARP [EDIT]

[F3] MAIN

Part selection

“Hold”
[PERFORM]

[EDIT]

Number [1] – [4]

[F1] VOICE

[SF1] VOICE

“P.WithVce”
[PERFORM]

[JOB]

[F3] COPY

[SF2] VOICE
[PERFORM]

[EDIT]

Part selection

[F2] OUTPUT

[SF2] EF SEND
[UTILITY]

[F5] MIDI

[SF3] SYNC

“MIDI Sync” = “auto” or “internal”