Yamaha MOXF6, Руководство пользователя

Страница: 56 / 80

MOXF6/MOXF8 Owner’s Manual
Quick Guide
56
The DAW applications Cubase, Logic Pro, SONAR and Digital
Performer can be controlled via the Remote Control mode of
the MOXF6/MOXF8.
Before you can use the Remote Control function, you’ll need
to follow the setup instructions below.
NOTE
Before making the setup of DAW Remote, make sure to properly
install the Yamaha Steinberg USB Driver and the MOXF6/MOXF8
Remote Tools.
Setting up the MOXF6/MOXF8
1
Connect this instrument to the computer via a USB
cable (page 53).
2
Press the [DAW REMOTE] button to enter the
Remote mode.
3
Press the [UTILITY] button to call up the REMOTE
display of the Utility mode. Then set the “DAW
Select” to the desired DAW software.
4
Press the [STORE] button to store the settings to
internal memory.
5
Start the DAW software on the connected
computer.
Setting up the DAW software on the computer
This section explains how to set up after starting each
application.
NOTE
When the cable between the MOXF6/MOXF8 and the Windows
computer is disconnected or the MOXF6/MOXF8 is turned off
accidentally, the DAW will not recognize the MOXF6/MOXF8
again even if you connect the cable again or turn the MOXF6/
MOXF8 on. If this occurs, exit the DAW software, then restart it
after setting up the MOXF6/MOXF8 and making sure the
connection is secure.
J Cubase
The settings will be completed by installing MOXF6/MOXF8
Remote Tools.
J SONAR
1
Pull down the [Options] menu and select [MIDI Devices]
to call up the “MIDI Devices” window.
2
Add “Yamaha MOXF6/MOXF8-2” to the Input Device,
then add “Yamaha MOXF6/MOXF8-2” to the Output
Device.
3
Pull down the [Options] menu and select [Control
Surfaces] to call up the Control Surface window.
4
Click the [+] button, select “Mackie Control,” then set the
Input Port to “Yamaha MOXF6/MOXF8-2” and set the
Output Port to “Yamaha MOXF6/MOXF8-2.”
J
Digital Performer
1
In the Audio/MIDI setup of a Mac computer, connect Port
2 of the interface of the MOXF6/MOXF8 to Port 2 of the
tone generator. When there is only one Port for the tone
generator, add the new Port, then connect it to the
interface.
2
Pull down the [Setup] menu and select [ControlSurface
Setup] to call up the Control Surface window.
3
Click the [+] button.
4
Select “Mackie Control” in the Driver section.
5
In the box for setting “Unit” and “MIDI,” select “Mackie
Control” in the “Unit” section and select “MOXF6/MOXF8
New Port 2” in the “MIDI” section.
J Logic Pro
1
Select the [Preference] menu

[Control Surfaces]

[Settings] to call up the Settings window.
2
Select the [New] menu

[Install].
3
Select “Mackie Control” in the model list, then add it as a
control surface.
MOXF6/MOXF8 Remote Tools can be downloaded from the
following Yamaha web site. For details on operating the
MOXF6/MOXF8 Remote Editor, see the PDF manual supplied
with the MOXF6/MOXF8 Remote Editor.
http://download.yamaha.com/
Remote-controlling the DAW software
For the most recent information on DAW software that can be
controlled from the MOXF6/MOXF8, see the following URL:
http://www.yamahasynth.com/