![background image](http://html2.mh-extra.com/html/yamaha/motif6-voice-editor/motif6-voice-editor_manual_3387165017.webp)
17
2
DEPTH settings
..................... Sets the degree to which the selected controller will affect
the parameter assigned to it.
3
DESTINATION settings
......... Click on the text box and choose the parameter you wish to
control.
4
ELEMENT switches
.............. Click these to enable/disable the Elements which will be
effected by the controller assignments.
COMMON LFO Panel (Normal Voice only)
5
LFO WAVE setting
................. Click on the text box and select the LFO waveform.
6
LFO SPEED setting
.............. Click on the text box and set the LFO speed.
7
LFO PHASE setting
.............. Click on the text box and select the LFO phase.
8
LFO KEY ON RESET setting
..... Click on the text box and select the method of restarting the
LFO when a note is played.
9
TEMPO SYNC setting
........... Click on the text box and set TEMPO SYNC to on or off.
)
TEMPO SPEED setting
......... Click on the text box and select determine how the LFO
pulses in sync with the Arpeggio or sequencer.
!
DEPTH setting
....................... Set the degree to which the selected controller will affect the
parameter assigned to it.
@
DESTINATION settings
......... Click on the text box and choose the parameter you wish to
control.
#
ELEMENT switches
.............. Click these to enable/disable the Elements which will be
effected by the controller assignments.
$
Editor graph
.......................... Click and drag the “handles” (square marks) to set the time-
dependent behavior of the Common LFO. The first handle
(furthest to the left) controls the “LFO Delay Time.” The
second controls the “LFO Fade In Time.” The third controls
the “LFO Control Time.” The last square mark (furthest to
the right) controls the “LFO Fade Out Time.” Drag the
handles horizontally to adjust the transition times.
%
USER LFO button
................. Click this to open the USER LFO dialog.
User LFO Panel (Normal Voice only)
1
TOTAL STEP
..................Determines the number of steps for the currently edited LFO
wave, up to a maximum of sixteen.
1
6
2
4
3
5