background image

File Management (File mode)

MOTIF XS Owner’s Manual

276

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf
ormance

 mode

Sampling

 mode 1

Sampling

 mode 2

Ref

erence

8

[SF3] Rename

Pressing this button calls up the window for entering the 
new name of the selected file. The File name can contain 
up to 20 characters. For detailed instructions on naming, 
refer to “Basic Operation” on page 82. 

9

[SF4] Delete 

Pressing this button to call up the Delete window. 

)

[SF5] New Dir (New Directory)

Pressing this button creates a new directory in the current 
directory. The directory name can contain up to 10 
characters. For detailed instructions on naming, refer to 
“Basic Operation” on page 82. 

!

[F1] File

Pressing this button calls up the File window from another 
window in the File mode. 

@

[F2] Mount

Pressing this button calls up the Mount window. For details, 
see page 277. 

#

[F3] Format

Pressing this button calls up the Format window. For 
details, see page 278. 

1

Press the [FILE] button to enter the File mode. 

The File window (page 275) appears. 

2

Mount the memory devices to which the file is 
saved or from which the file is loaded. 

The USB storage device is automatically mounted as 
soon as it is connected to the USB TO DEVICE 
connector on the rear panel. The hard disk drive of the 
computer connected to the MOTIF XS via the network 
can be mounted in the Mount display (page 277). 

3

Select the desired device. 

Select the desired device from the ones mounted in 
step 2. 

4

Move the path to the desired directory. 

Select the desired directory in the selected device. To 
go down from the current directory, move the cursor to 
the desired directory in the Directory/File list then press 
the [ENTER] button. To go up from the current directory, 
move the cursor to the top line in the Directory/File list 
then press the [ENTER] button. The Dir line indicates 
the current directory name with the path and the lower 
box lists the directories and files belonging to the 
current directory. 

n

If you wish to create a new directory and save the file 

there, press the [SF5] New Dir button. For detailed 

instructions on creating a new directory, see the left 

column. 

5

Select the desired data type from the Type 
column (

4

). 

In the Directory/File list box, only files related to the 
selected file type are listed. 

n

Depending on the mode selected before calling up the 

File mode, the available data types differ. If you cannot 

find the data type which you wish to handle, for example 

“voice,” press the [EXIT] button to exit from the File 

window, press the [VOICE] button to enter the Voice 

mode, then press the [FILE] button to call up the File 

window again. 

6

Select the desired file by moving the cursor in 
the Directory/File list (

3

). 

This operation is not necessary when you execute Save 
or New Directory. When you wish to execute the 
Rename or Delete operation, press the [SF3] Rename 
button or the [SF4] Delete button. For detailed 
instructions on renaming and deleting, see page 276 
and left column. 

Follow the instructions below to change the name of the 
file. 

1

  Select a file to be renamed by moving the cursor in 

the Directory/File list. 

2

Press the [SF3] button to call up the Input Character 
window. 

3

Enter the new name of the selected file. 

4

Press the [ENTER] button to actually change the 
name of the selected file. 

Follow the instructions below to delete a file. 

1

Select a file to be deleted by moving the cursor in the 
Directory/File list. 

2

Press the [SF4] button to call up the Delete window. 

3

Press the [ENTER] button to delete the selected file.

Follow the instructions below to create a new directory. 

1

Press the [SF5] button to call up the Input Character 
window. 

2

Enter the name of the new Directory. 

3

Press the [ENTER] button to actually enter the name 
of the newly created directory. 

Basic Procedure in the File mode

Содержание MOTIF XS6

































































































































































































































































































































Отзывы: