Yamaha MONTAGE M6, Быстрое руководство

Страница: 24 / 56

22
MONTAGE M Quick Guide
5-21
[MASTER VOLUME] knob
Use this knob for adjusting the Master volume.
5-22
[A/D INPUT ON/OFF] button
Use this button to enable or disable the inputs from the A/D INPUT jacks.
5-23
A/D INPUT [GAIN] knob
Use this knob to adjust the gain for the audio signals input from the A/D INPUT.
Whenever there is an input, the SIG/PEAK lamp is turned on in blue. When the input signal reaches just short of
clipping, the SIG/PEAK lamp lights up in red. Adjust the knob so that the SIG/PEAK lamp briefly turns red whenever the
input signal reaches the maximum level.
NOTE
You may need to change the gain setting depending on the level of the external equipment connected to the A/D INPUT jacks, in
the following order: [UTILITY]
g Settings g Audio I/O g A/D Input . When the output level of the connected equipment (such as a
microphone) is low, set this parameter to Mic . When the output level of the connected equipment (such as a synthesizer keyboard or
CD player) is high, set this parameter to Line .
For other input-related parameters, change the settings as shown below.
The Volume for the A/D Input block and send level for the Pan and effects
• [PERFORMANCE]
g
Mixing
• [EDIT/ ]
g
Audio In
g
Mixing
• [NAVIGATION]
g
[PART COMMON]
g
A/D Input
or
[PART COMMON]
g
[NAVIGATION]
g
A/D Input
• Set the Part group [1-8/9-16]/[USB AUDIO / A/D INPUT] button to “USB AUDIO / A/D INPUT,” and then press PART
button 8.
Destination for sending audio signals from the A/D INPUT jacks to the specific effect in the Effect block
• [EDIT/ ] g Audio In g Routing
Adjustment of the gain for the A/D INPUT jacks and enabling or disabling the jack
• A/D INPUT [GAIN] knob and A/D INPUT [ON/OFF] button
• [UTILITY]
g Settings g Audio I/O g A/D Input