Yamaha MONTAGE M6, Быстрое руководство

Страница: 21 / 56

19
MONTAGE M Quick Guide
5-6
Knobs 1–8
By turning these eight knobs, you can control various parameters related to the Part sound, Arpeggio playback, Motion
Sequencer, and others. Select the functions for Knobs 1–8 by using the QUICK EDIT button on the left.
5-7
[ASSIGN] button
When this button is activated, Knobs 1–8 are ready to be used as assignable knobs.
5-8
Super Knob
You can use this knob to simultaneously control multiple parameters ( Assign 1–8) assigned to Knobs 1–8.
You can also control the Super Knob from a connected FC7 foot controller.
For more information on the values controlled with the Super Knob, as well as instructions on how to assign functions
to
Assign 1 to 8 parameters and how to make settings for the foot controller connections, refer to the Operation
Manual.
5-9
KNOB POSITION buttons
Use these buttons to view the values corresponding to the Super Knob position to be shown on the Sub display.
You can also check the values from [PERFORMANCE]
g Motion Control g Super Knob .
[LEFT] button The value corresponding to the leftmost position for the Super knob
[MID] button The value (the center value) corresponds to the mid position for the Super knob
The center value can be assigned to any position on the knob.
NOTE
The [MID] button is available only when the Super Knob Mid Position setting is set to something other than
off.
[RIGHT] button The value corresponding to the rightmost position for the Super knob
Adjust the parameters using Knobs 1–8, and then press this button while holding down the [SHIFT] button to save the
settings.
By setting different values for each button, you can set morph transitions using these three reference points.