Yamaha Montage 7, Справочное руководство

Страница: 127 / 187

Edit Search Utility Live Set Performance
N ormal Part (A W M2) Dr u m Part N ormal Part (FM-X) Common/A u dio
MONTAGE Reference Manual
Drum Part Edit
Common
Part Settings
General
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Control Assign
Receive SW
Key
Osc / Tune
Filter
Level / Pan
Element EQ
127
Reference
New Waveform
Loads Audio data stored in the USB flash memory as “Waveform.” For details on loading, see “Load”
(
page 174 ).
After the Waveform is loaded, the Edit Waveform parameter will be available. For details on “Edit
Waveform,” see
page 96 .
Coarse (Coarse Tune)
Determines the pitch of each Drum Key Wave in semitones.
Settings: -48 – +48
Fine (Fine Tune)
Determines the fine tuning for the pitch of each Drum Key Wave.
Settings: -64 – 63
Pitch/Vel (Pitch Velocity Sensitivity)
Determines how the pitch of the selected Drum key responds to velocity.
Settings:
-64 – 63
Positive values:
The harder you play the keyboard, the more the pitch rises.
Negative values: The harder you play the keyboard, the more the pitch falls.
0: No change in pitch.
Rcv Note Off (Receive Note Off)
Select whether MIDI Note Off messages are received by each Drum Key.
Settings:
off, on
Group (Alternate Group)
Set the Alternate Group to which the key is assigned. The Parts to which the same number is assigned
here cannot sound simultaneously. This setting helps to reproduce the sounds of a real drum kit, in which
some drum sounds cannot physically be played simultaneously, such as open and closed hi-hats.
Settings:
off, 1 – 127
KeyRev (Drum Key Reverb Send)
KeyVar (Drum Key Variation Send)
Determines the level of the Drum key sound (the bypassed signal) that is sent to Reverb/Variation effect.
This is not available depending on the setting of the Drum Key Connection Switch.
Settings: 0 – 127
Drum Key Out (Drum Key Output Select)
Determines the specific output for the individual Drum Key.
This is not available depending on the settings of Drum Key Connection Switch or Part Output.
Settings:
MainL&R, AsgnL&R, USB1&2…USB29&30, AsgnL, AsgnR, USB1 – 30
MainL&R: Outputs in stereo (two channels) to the OUTPUT [L/MONO]/[R] jacks.
AsgnL&R:
Outputs in stereo (two channels) to the ASSIGNABLE OUTPUT [L]/[R] jacks.
USB1&2…USB29&30:
Outputs in stereo (Channels 1&2 – 29&30) to the [USB TO HOST] terminal.
AsgnL:
Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [L] jack.
AsgnR: Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [R] jack.
USB1 – 30: Outputs in mono (Channels 1 – 30) to the [USB TO HOST] terminal.
Keyboard Select (Keyboard Select Switch)
Determines whether or not the Keyboard Select setting is active or not. When this is set to on, you can
select Drum Keys by playing the notes on the keyboard.
Settings: Off, On
Drum Key
Indicates the selected Drum key.
Settings: C0 – C6