MONTAGE Reference Manual
41
Reference
Arp/MS Grid (Arpeggio/Motion Sequencer Grid)
Determines the type of note that serves as the basis for the Quantize or Swing. The parameter value is
displayed in clocks.
For the Motion Sequencer, this parameter value is one step length. This setting is applied to the Part which
is selected as the Sync Part (above).
Settings:
60 (32nd note), 80 (16th note triplet), 120 (16th note), 160 (8th note triplet), 240 (8th note), 320 (1/4 note triplet),
480 (1/4 note)
Random (Super Knob Motion Sequencer Random)
Determines the degree to which the Step Value of the Sequence is randomly changed.
Settings:
0 – 127
Sync (Super Knob Motion Sequencer Sync)
Determines if the playback of the Motion Sequence applied to the Super Knob is synchronized to the
Tempo, Beat, or Arpeggio of the Performance.
Settings:
Off, Tempo, Beat, Arp
Off:
Super Knob Motion Sequencer plays back according to its own clock and is not synchronized to an external
clock.
Tempo:
Super Knob Motion Sequencer is synchronized with the Performance tempo.
Beat:
Super Knob Motion Sequencer is synchronized with the beat.
Arp:
Super Knob Motion Sequencer is synchronized with the 1st beat of the measure of the currently playing
Arpeggio.
Speed (Super Knob Motion Sequencer Speed)
Determines the speed of the playback of the Motion Sequence.
This parameter is active when the Super Knob Motion Sequencer Sync is “Off.”
Settings:
0 – 127
Unit Multiply (Super Knob Motion Sequencer Unit Multiply)
Adjusts the Super Knob Motion Sequencer playback time.
This parameter is active when the Super Knob Motion Sequencer Sync is “Off.”
Settings:
50% – 6400%, Common
200%:
The playback time will be doubled and the tempo is halved.
100%:
The normal playback time.
50%:
The playback time will be halved and the tempo doubled.
Common:
The value set in the Unit Multiply common to the all Parts will be applied.
Key On Reset (Super Knob Motion Sequencer Key On Reset)
Determines whether or not the playback of the Motion Sequence is stopped when you play the keyboard.
This parameter is active when the Super Knob Motion Sequencer Sync is set to something other than
“Arp.”
Also this parameter is not available when “Trigger” is set to “On.”
Settings:
Off, Each-On, 1st-On
Each-On:
The Sequence resets with each note you play and starts the Sequence from the beginning.
1st-On:
The Sequence resets with each note you play and starts the Sequencer from the beginning. If you play a
second note while the first is being held, the Sequence continues cycling according to the same phase as triggered
by the first note—in other words, the Sequence only resets if the first note is released before the second is played.
Loop (Super Knob Motion Sequencer Loop)
Determines whether the Motion Sequence is played only once or repeatedly.
Settings:
Off, On
Velocity Limit (Super Knob Motion Sequencer Velocity Limit)
Determines the minimum and maximum Velocity values over which the Motion Sequence responds.
Settings:
1 – 127
Cycle (Super Knob Motion Sequencer Cycle)
Selects the desired step length for the Motion Sequence.
Settings:
1 – 16
Load Sequence
Loads Motion Sequence data in the User Memory. For details about Loading, see “Load” (
