17
If there is a Group Master on the bus, by selecting the submenu of Group 1 of the Manual mode, as
shown below, the mLAN devices lock to the Group Master. If the Group Master does not exist, set the
Status to “Manual: Group 1” so that the devices will be ready for syncing to the Group Master.
If a Slave mLAN device is in Manual mode, you can drag that item and release it on the mLAN device
that you want to specify as the master to specify the master/slave relationship.
Master and Slave mode settings
By clicking (Macintosh) or right-clicking (Windows) a Slave mLAN device, you can use the capabilities
of the mLAN device to specify the Slave mode.
By clicking (Macintosh) or right-clicking (Windows) a Master mLAN device, you can use the capabili-
ties of the mLAN device to set/cancel the Group Master. However, this setting is not possible for an
mLAN device that does not have Group Master functionality.
Specifying the common word clock master from the popup menu
Drag and release the Slave mLAN device to specify the Master
Mode settings for a Slave mLAN device
Common word clock setting for a Master mLAN device
