background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-19

7

EAU22170

Adjusting the rear brake lever 
free play

The brake lever free play should mea-
sure 10–20 mm (0.39–0.47 in) as
shown. Periodically check the brake le-
ver free play and, if necessary, adjust it
as follows.

To increase the brake lever free play,
turn the adjusting nut at the brake shoe
plate in direction (a). To decrease the
brake lever free play, turn the adjusting
nut in direction (b).

EWA10650

WARNING

If proper adjustment cannot be ob-
tained as described, have a Yamaha
dealer make this adjustment.

EAU22380

Checking the front brake pads 
and rear brake shoes
(for AL115S only)

The front brake pads and the rear
brake shoes must be checked for wear
at the intervals specified in the periodic
maintenance and lubrication chart.

EAU22430

Front brake pads

Each front brake pad is provided with
wear indicator grooves, which allow you
to check the brake pad wear without
having to disassemble the brake. To
check the brake pad wear, check the
wear indicator grooves. If a brake pad

a. Rear brake lever free play

1. Rear brake lever free play adjusting nut

1. Brake pad wear indicator groove (x 2)

Содержание Mio Amore AL115













































































Отзывы: