Yamaha Mio Amore AL115 Скачать руководство пользователя

Страница: 45 / 76

PERIODIC MAINTENANCE AND ADJUSTMENT

7-12

2. Remove the air filter case cover by

removing the screws.

3. Remove the air filter element by

pulling it out.

4. Check the air filter element for ex-

cessive dirt or damage and re-
place it if necessary.

5. Place the air filter element in its

original position.

6. Install the air filter case cover by

installing the screws.

Cleaning the V-belt case air filter
element

1. Place the vehicle on the center-

stand.

2. Remove the V-belt air filter case

cover by removing the bolts.

3. Remove the dust boot and the ele-

ment by pulling it out.

4. Clean the dust boot with dry cloth.
5. Clean the element with solvent,

and then squeeze the remaining
solvent out.

6. Check the element for damage

and replace it if necessary.

7. Apply oil of the recommended type

to the entire surface of the ele-
ment, and then squeeze the ex-
cess oil out.

WARNING! Use

only a dedicated parts cleaning
solvent. To avoid the risk of fire
or explosion, do not use gaso-
line or solvents with a low flash
point.

[EWA10431]

NOTICE:

Using

gasohol may cause engine trou-
ble depending on the engine. If
gasohol is used and engine
trouble occurs, contact your
Yamaha dealer as soon as pos-
sible.

[ECA10521]

1. Air filter element (Wet type)

1. V-belt case air filter cover

2. Bolts (x 4)

1. Dust boot

2. V-belt air filter element

Содержание Mio Amore AL115













































































Результаты поиска

Содержание Mio Amore AL115

Отзывы:

Похожие инструкции для Mio Amore AL115

Бренды по названию

Популярные бренды

Yamaha Mio Amore AL115, Руководство пользователя

Результаты поиска

Содержание Mio Amore AL115

Отзывы:

Похожие инструкции для Mio Amore AL115

Бренды по названию

Популярные бренды