25
MDR
4. Prepare the MDF3 for reception.
While pressing the
REC
key, press the
START/STOP
key.
The LEDs above these keys will light, and
the following display will appear in the
LCD.
This display indicates that the MDF3 is
ready to begin receiving block data.
5. Send the bulk data.
Execute the sending device’s bulk dump
procedure to begin sending data. Refer
to the appropriate operation manual for
a description of the correct procedure.
As soon as the MDF3 begins receiving
data, the MIDI LED will light and the dis-
play will begin changing to indicate the
amount of data received.
The MIDI LED will go out when all of
the bulk data has been received.
Hint:
To stop reception temporarily, press the
PAUSE
key. The LED above the key will blink,
and the MDF3 will complete the reception
of the current data block. Once the block has
been received, the
PAUSE
key LED will light
steadily to indicate that the MDF3 has paused.
Pressing the
PAUSE
key again or pressing the
foot switch (if connected) will cause the
MDF3 to resume reception.
You can cancel reception immediately by
pressing the
START/STOP
key. If you do so,
the MDF3 will not create an MDR data file.
MDRå03
~~~
00-000k
default file
name
current block
number
total data received
(kilobytes)
MDRå03
~~~
01-001k
