Yamaha MCP1, Руководство по установке

Страница: 15 / 24

15 MCP1 Installation Man u al
Alert list
The follo w ing ta b le lists the alerts generated b y the MCP1, their meaning, and the appropriate
action to take.
W hen a Fa u lt type alert occ u rs, it w ill immediately b e displayed. Other alert types can b e
checked b y to u ching [Alert] in the Settings page. A single occ u rrence is sho w n w hen the sit u a-
tion occ u rs. A contin u o u s occ u rrence is sho w n w hen the sit u ation occ u rs and w hen it ends.
If the pro b lem cannot b e sol v ed, contact yo u r Yamaha dealer.
Number Content Action Type
Single /
Continuing
Device abnormality
001
The u nit did not start u p nor-
mally.
T u rn off the po w er s u pply of the
PSE, w ait at least six seconds,
and then t u rn on the po w er. If
this does not sol v e the pro b lem,
initialize the MCP1.
Fa u lt Contin u ing
003
Failed w riting to internal flash
ROM.
Fa u lt Contin u ing
005 MAC address w as lost. Fa u lt Contin u ing
017
Settings sa v ed in internal
memory w ere lost.
Perform synchronization again
u sing MTX-MRX Editor.
Fa u lt Contin u ing
040 The IP address conflicts.
Make settings so that the IP
address does not conflict.
Error Contin u ing
041
The IP address w as not esta b -
lished w ithin 60 seconds after
start u p.
If the IP Setting is set to “PC,”
u se MTX-MRX Editor or the
DHCP ser v er to specify the IP
address.
W arning Contin u ing
042
The de v ices making u p the
MTX/MRX system w ere not
fo u nd on the net w ork.
Po w er-on all de v ices making u p
the system, and make s u re that
they are correctly connected to
the net
w ork.
Error Contin u ing
043
Too many de v ices are con-
nected to the net w ork.
Red u ce the n u m b er of de v ices
connected to the net w ork.
Error Single
051
A de v ice w ith the same UNIT
ID w as fo u nd among the
de v ices connected to the same
net w ork.
Make settings so that the UNIT
ID does not conflict.
Error Contin u ing
060 Failed to recall a preset. Initialize the MCP1. Error Contin u ing
064
The preset co u ld not b e
recalled.
The Preset selected for recall
cannot
b e recalled as no data
has b een stored to it, or another
de v ice may ha v e b een added
after presets w ere stored.
Please synchronize and check
all presets
u sing MTX-MRX
Editor, and store again.
W arning Contin u ing