Yamaha LZ200N, Руководство по обслуживанию

Страница: 251 / 392

6-64
E
LOWR
SHIMMING (REGULAR ROTATION MODELS)
(FOR WORLDWIDE)
(5) Calculate the pinion shim thickness
(T3).
NOTE:
• “P” is the deviation of the lower case
dimension from standard. It is stamped
on the trim tab mounting surface of the
lower case in 0.01-mm units. If the “P”
mark is missing or unreadable, assume a
“P” value of “0”, and check the backlash
when the unit is assembled.
• If the “P” mark is negative (–), then add
the “P” value to the measurement.
Example:
If M3 is “46.85 mm”, M4 is “32.52 mm” and
P is “–5”, then
T3 = 80.0 + (–5)/100 – 46.85 – 32.52 mm
= 80.0 – 0.05 – 46.85 – 32.52 mm
= 0.58 mm
(6) Select the pinion shim(s) (T3).
Pinion shim thickness (T3) =
80.0 + P/100 – M3 – M4
Calculated numeral
at 1/100th place
Rounded
numeral
More than or less
0.00 0.02 0.00
0.02 0.05 0.02
0.05 0.08 0.05
0.08 0.10 0.08
Available shim thickness
0.10, 0.12, 0.15, 0.18, 0.30, 0.40
and 0.50 mm
6590