Yamaha LS2000, Руководство по обслуживанию

Страница: 230 / 277

ELECTRICAL SYSTEM x
7
ELEC
INDICATOR PANEL
1. Check:
●
Bulbs and buzzer function.
Turn the port key switch to the ON position.
The port engine overheat, low fuel, power
on and low oil lights should glow and you
will hear 3 beeps from the warning buzzer.
The warning lights will go out after a few
seconds and the power on light will contin-
ue to glow dimly.
Turn the port key switch off and turn the
starboard key to the ON position. The star-
board overheat, low fuel, power on and low
oil light should glow and you should hear 3
beeps from the warning buzzer. The warn-
ing lights will go out after a few seconds
and the power on light will continue to glow
dimly.
Not working
➔
Repair wiring or replace
bulbs or indicator assembly as needed.
OVERHEAT WARNING
1. Check:
●
Disconnect the 9-pin indicator connec-
tor behind the instrument panel and test
according to the table below.
●
Bulb glows and buzzer beeps 5 times.
Not working
➔
Repair wiring or replace
indicator assembly as needed.
NOTE:
Only momentary grounding of the
Tan/White or Tan wire is necessary to acti-
vate the warning signal but the light will
remain lit until current is removed from the
circuit.
Overheat Warning
Battery Leads
Warning On +12 VDC Ground
Port Engine Purple/White Black & Tan/White
Stbd. Engine Purple Black and Tan
PORT
STARBOARD
21