IMX644 Manager Owner’s Manual
18
• Parameter editing area
Here you can use mouse operations to visually edit the various parameters. The screen that is shown will depend on the tab that’s
selected.
• Screen switching tabs
1
[BLOCK] tab
Opens the BLOCK screen (
page 19
). This shows a block diagram of the entire signal route from input to output, and allows
you to make parameter settings.
2
[INPUT] tab
Opens the INPUT screen (
page 23
). Here you can edit the input channel parameters.
3
[MATRIX] tab
Opens the MATRIX screen (
page 24
). Here you can specify the output channels to which the input channel signals are sent.
4
[OUTPUT] tab
Opens the OUTPUT screen (
page 25
). Here you can edit parameters other than EQ for OUTPUT channels 1–4.
5
[OUTPUT EQ] tab
Opens the OUTPUT EQ screen (
page 26
). Here you can edit the parameters of the 6-band equalizers provided for OUTPUT
channels 1 through 4.
6
[MISC] tab
Opens the MISC screen (
page 28
). Here you can edit settings for functions such as Priority Ducker, Music Override, and Feed-
back Suppressor.
7
[GPI] tab
Opens the GPI screen (
page 30
). Here you can specify the memory that will be recalled for each input port of the GPI connec-
tor, and the make/open status for each output port.
8
[MEMORY] tab
Opens the MEMORY screen (
page 31
). Here you can save your edited parameter settings in sixteen different memories, or
recall previously-saved settings.
1
2
3
4
5
6
7
8
