IMX644 Manager Owner’s Manual
12
Installing the IMX644 USB Driver (Windows XP users)
1
Power-off the IMX644.
2
Use a USB cable to connect the IMX644 to your computer.
The “Found New Hardware Wizard” screen will appear.
NOTE
• Make the USB connection directly to your computer without going through a USB hub.
• A dialog box may ask you whether you want to connect to Windows Update. If so, select the option button at the left of “No, not this
time,” and click [Next].
3
Select the option button located at the left of “Install from a list or a specified location (advanced),” and
click [Next].
4
Select the option button located at the left of “Search for the best driver in these locations,” select
“Include this location in the search.” Then click the [Browse] button, and inside the IMX644 folder, select
the folder that contains the driver (“C:\Program Files\YAMAHA\IMX644\Usbimx644” by default), and click
[Next].
NOTE
• If a message indicating that the software “has not passed logo testing” appears during the installation, click [Continue].There is no need
to halt the installation. If this message does not appear, simply proceed to the next step.
5
When the installation is completed, a message indicating this will appear.
Click the [Finish] button to close the screen.
6
Repeat steps 3 through 5, above.
7
While holding down the IMX644’s MEMORY [D] button, power-on the IMX644.
The IMX644 will start up in IMX644 Manager mode.
8
Start up IMX644 Manager, either by choosing [Start]
→
[All programs]
→
[YAMAHA IMX644 Manager]
→
[IMX644 Manager], or by double-clicking the shortcut icon on the desktop.
If the software was installed successfully, IMX644 Manager’s [Status] indicator will light green, and it
will be online. If IMX644 Manager does not go online, refer to
page 32
of “Troubleshooting.”
