HY144-D-SRC Firmware Update Guide
12
7.
If you see the interface selection screen,
select the interface card to connect the
Dante device.
8.
Click [Failsafe Recovery].
9.
When the HY144-D-SRC is detected, click
the [Stop Scan] button.
If several minutes have passed without
detection, check whether the cable might be
disconnected or broken, whether the TCP/IP
settings are correct or not, whether the
device to which the HY144-D-SRC is installed
is running or not, and whether the HY144-D-
SRC is recognized by the Dante Controller.
10.
Select the check box of the detected
HY144-D-SRC.
