background image

 

HY144-D-SRC Firmware Update Guide 

1

 

 Precautions 

  The user assumes full responsibility for the update. 

  Update the firmware components one device at a time. 

  Please note that the device may be damaged if you fail to follow these instructions 

properly, or turn off the device or disconnect the cable while the update is in 
progress. 

  If the update fails, and the device still does not operate correctly even after you 

execute the update once again, please contact your Yamaha dealer. 

  This guide is the exclusive copyrights of Yamaha Corporation. 

  Audinate owns exclusive copyrights for the Dante firmware and its update program. 

  It is prohibited to duplicate or modify the firmware, software or this guide, in part or 

in their entirety, without permission from the copyright owner. 

  The illustrations and screens as shown in this guide are for instructional purposes 

only. 

  Yamaha Corporation makes no representations or warranties with regard to the use 

of the software and documentation and cannot be held responsible for the results 
of the use of this guide and the software. 

  Windows is a registered trademark of Microsoft ® Corporation in the United States 

and other countries. 

  Mac is trademark of Apple Inc., registered in the U.S. and other countries. 

  The company names and product names in this guide are the trademarks or 

registered trademarks of their respective companies. 

  Software may be revised and updated without prior notice. 

 Contents 

Preparing for the update .................................................... 2

 

Update procedure sequence ........................................... 2

 

Install the Dante Firmware Update Manager .................. 3

 

Computer TCP/IP setting ................................................. 4

 

Updating the firmware ..................................................... 6

 

About Failsafe Mode ....................................................... 10

 

Trouble shooting ............................................................ 14

 

SRC mode ........................................................................ 15

 

 

 

HY144-D-SRC Firmware Update Guide 

Thank you for choosing a Yamaha product. This guide explains how to update the HY144-D-SRC 
firmware. The SRC modes can be changed by updating to the card’s firmware corresponding to each 
SRC mode (page 7). 

EN 

Содержание HY144-D-SRC
















Отзывы: