15
RX-V795a/RDS/HTR-5170
RX-V795a
/
RDS
HTR-5170
(5) SPEAKERS SET
The input is automatically discriminated by AC3>DTS>PCM>analog. The L/R signals are output to the channels
specified by the submenu without being processed (through).
There are the following 9 submenu items: The signal from the DSP block is normally in the effect off status for menu
items 1-4. For other menu items, the same signal as in 2. DSP THROUGH: YSS918 menu is output.
REMOTE
SUB MENU
CENTER SP
REAR SP
MAIN SP
MAIN LVL
LFE/BASS
OUTPUT
CODE
1
MAIN:SML 0dB
7A-8B
LARGE
LARGE
SMALL
0dB
SWFR
MAIN L/R
2
MAIN:LRG 0dB
7A-8C
LARGE
LARGE
LARGE
0dB
SWFR
MAIN L/R
3
MAIN:LRG -10
7A-8D
LARGE
LARGE
LARGE
-10dB
SWFR
MAIN L/R
4
B:M&C:NONE
7A-8E
NONE
LARGE
LARGE
0dB
MAIN
MAIN L/R
5
BASS:MAIN
7A-8F
LARGE
LARGE
LARGE
0dB
MAIN
LFE -> L/R
6
LFE/BASS:SWFR
7A-90
LARGE
LARGE
LARGE
0dB
SWFR
LFE -> SWFR
7
CENTER:NONE
7A-91
NONE
LARGE
LARGE
0dB
SWFR
CENTER -> L/R
8
C:SML&R:SML
– – –
SMALL
SMALL
LARGE
0dB
SWFR
CENTER/REAR
9
FRONT MIX
7A-85
LARGE
LARGE
LARGE
0dB
SWFR
FRONT -> L/R
LARGE: Mode in which speakers with high bass-sound playback capability (large unit) are used. Full frequency band
widths is output.
SMALL : Mode in which speakers with low bass-sound playback capability (small unit) are used. Frequencies below 90 Hz
are mixed with the channel specified by LFE/BASS.
NONE : Mode in which center speaker is not used. The center audio signal is reduced by 3dB and mixed into MAIN L/R.
M
: MAIN
C
: CENTER
R
: REAR
SWFR : SUBWOOFER
B
: BASS
Output : The signal before MASTER VOLUME is indicated.
5.MAIN:SML
0dB
5.MAIN:LRG
0dB
5.MAIN:LRG
-10
5.B:M&C:NONE
5.BASS:MAIN
5.BASS:SW
5.CENTER:NONE
5.C:SML&R:SML
5.FRONT
MIX
The analog switches in each submenu are set as follows: