13
RX-V795a/RDS/HTR-5170
RX-V795a
/
RDS
HTR-5170
(2) DSP THROUGH
The input is automatically discriminated by signal detection and switched with priorities AC3>DTS>PCM
AUDIO>analog. There are the following three submenus.
2. YSS918-SRAM
MAIN L/R are input to the DSP via AC3D2av, pass through SRAM, and are then output to all channels without
being processed. (Remote control code 7A-89 : DSP/2)
2. YSS918
MAIN L/R are input to the DSP via AC3D2av, and then output to all channels without being processed.
2. DSP FULL BIT
MAIN L/R are input to the DSP via AC3D2av, and then output to all channels without being processed.
The head margin is abolished, and DSP outputs digital full-bit signals.
Same as the above menu, except that the digital data is output to DA with full bits.
DIR2
CODEC.DA
AK4526
YM3436
CODEC.AD
AC3D2av(YSS918)
AK4526
DECODER
DA
AK4320
1M SRAM
DSP
ANALOG IN
L/R
FRONT R
REAR L
REAR R
CENTER
SUBWOOFER
L/R
L/R
L/R
L/R
DIGITAL IN
FRONT L
MAIN R
MAIN L
DIR2
CODEC.DA
AK4526
YM3436
CODEC.AD
AC3D2av(YSS918)
AK4526
DECODER
DA
AK4320
1M SRAM
DSP
ANALOG IN
(L+R)/2
REAR L
REAR R
L/R
DIGITAL IN
FRONT R
FRONT L
MAIN R
MAIN L
L/R L/R
(L+R)/2
(L+R)/2
(L+R)/2
CENTER
SUBWOOFER