21
RX-V595a/HTR-5150/RX-V595aRDS
Confirmation of Idling Current of Main Amplifier
•
Right after power is turned on, confirm that the voltage across the
terminals of R688(Main Lch),R690(Main Rch), R692(Center),
R694(Rear Lch), R696(Rear Rch) are between 0.1mV and 5.0mV.
•
If it exceeds 5.0mV, open (cut off) R571 (Main Lch), R577 (Main
Rch), R589 (Center), R595 (Rear Lch), R583 (Rear Rch) and
reconfirm the voltage again.
•
Confirm that the voltage is 0.25mV ~ 15.0mV after 60 minutes.
■
AMP ADJUSTMENT
Note)
•
If R571, R577, R589, R595 and
R583 have already been cut off
and idling current does not flow,
reconnect R571, R577, R589,
R595 and R583.
•
Q521 ~ Q525 are transistors for
temperature correction.
Apply silicone grease to contact
surface with the heat sink.
R571(Lch)
R577(Rch)
R589(Cch)
R595(RLch)
R583(RRch)
R583
R589
Q525
Q523
Q524
Q522
Q521
R692
R696
R595
MAIN (1)
MAIN (7)
Front Panel
R694
R690
R577
R688
R571
0.1mV ~ 5.0mV
(DC)
R688(Lch)
R690(Rch)
R692(Cch)
R694(RLch)
R696(RRch)
Cut off
Содержание HTR-5150
Страница 74: ...RX V595a HTR 5150 RX V595aRDS ...