Yamaha HTR-5140RDS Скачать руководство пользователя | Manualshive

Страница: 12 / 68

background image

12

SPEAKER SETUP

This unit is designed to provide the best sound-field quality with
a 5-speaker configuration, using main speakers, rear speakers
and a center speaker.
The main speakers are used for the main source sound plus
the effect sounds. They will probably be the speakers from
your present stereo system. The rear speakers are used for
the effect and surround sounds, and the center speaker is for
the center sounds (dialog, vocals, etc.). If for some reason it is
not practical to use a center speaker, you can do without it.
Best results, however, are obtained with the full system.

The main speakers should be high-performance models and
have enough power-handling capacity to accept the maximum
output of your audio system.
The other speakers do not have to be equal to the main
speakers. For precise sound localization, however, it is ideal to
use high-performance models that can reproduce sounds over
the full-range for the center speaker and the rear speakers.

5-Speaker Configuration

This configuration is the most effective and recommended one.
When playing back a source using the DSP program,
DOLBY PRO LOGIC/DOLBY DIGITAL, DOLBY PRO LOGIC
ENHANCED/DOLBY DIGITAL ENHANCED, 70 mm MOVIE
THEATER/DIGITAL MOVIE THEATER, MONO MOVIE or TV
SPORTS, or when playing back a source which contains
center-channel signals (dialog, vocals, etc.) using any DSP
program that is Dolby Digital-decoded, conversations will be
output from the center speaker and the ambience will be
excellent.
Note: Set the CNTR (CENTER SPEAKER) mode to the

“LARGE” or “SMALL” position. (See page 21 for
details.)

SPEAKER CONFIGURATION

Use of a subwoofer expands your sound field
It is also possible to further expand your system with the
addition of a subwoofer and amplifier. The use of a subwoofer
is effective not only for reinforcing bass frequencies from any or
all channels, but also for reproducing the LFE (low frequency
effect) sound with high fidelity when playing back a source that
is Dolby Digital-decoded. You may wish to choose the
convenience of a YAMAHA Active Servo Processing Subwoofer
System, which has its own built-in power amplifier.

4-Speaker Configuration

The center speaker is not used in this configuration. When
playing back a source using the DSP program, DOLBY PRO
LOGIC/DOLBY DIGITAL, DOLBY PRO LOGIC ENHANCED/
DOLBY DIGITAL ENHANCED, 70 mm MOVIE THEATER/
DIGITAL MOVIE THEATER, MONO MOVIE or TV SPORTS, or
when playing back a source which contains center-channel
signals (dialog, vocals, etc.) using any DSP program that is
Dolby Digital-decoded, the center sound is output from the left
and the right main speakers. However, the sound effect of
other programs will be the same as that of the 5-speaker
configuration.
Note: Be sure to set the CNTR (CENTER SPEAKER) mode to

the “NONE” position. (See page 21 for details.)

SPEAKERS TO BE USED

Main L

Center

Main R

Rear L

Rear R

Dialog

Surround sound

Main L

Main R

Rear L

Rear R

Dialog

Surround sound

01RX-V495RDS-2

6/22/99, 12:26 PM

12

«
...
10
11
12
13
14
...
»

Содержание HTR-5140RDS





































































Отзывы:

Нет отзывов

Похожие инструкции для HTR-5140RDS

Бренд: Pansat Страницы: 32

Бренд: Teac Страницы: 24

Бренд: Teac Страницы: 59

Бренд: Teac Страницы: 32

Бренд: Teac Страницы: 17

Бренд: Icom Страницы: 16

Бренд: Advantech Страницы: 97

Бренд: Xtrend Страницы: 93

Бренд: Navman Страницы: 54

Бренд: JBL Страницы: 7

Бренд: BW Broadcast Страницы: 23

Бренд: Radio Shack Страницы: 11

Бренд: Icom Страницы: 147

SmoothFlite RRS

Бренд: AR Страницы: 67

Бренд: ESX Страницы: 40

Бренд: SAL Страницы: 60

Бренд: KBSOUND Страницы: 16

Бренд: Sennheiser Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды