STEP 4:
Install the WBC wiring harness and WBC1 to the PWC if purchased
(See WBC Yamaha PWC quick start guide for detailed information.)
STEP 5:
Install the Plug and Play Yamaha Patch Harness to the PWC
Connect the 3 main PWC engine harness connectors to the patch loom.
Connect the 2 main ECU connectors to the Haltech Elite ECU.
Route the Program/Setup cable to the front of the PWC and up into the
front storage compartment for easy access.
Connect the optional CAN Wideband to the CAN cable on the patch harness
if installed.
Connect any aftermarket sensors to the auxiliary connector if available.
Figure 7 – Installing the Plug and Play Harness
Figure 8 – Plug and Play Harness Installed with optional WBC1
STEP 6:
Install the waterproofing kit to the ECU so that the ecu can be tuned on
the water, the kit comprises of the IP67 USB Cable, Sealing cap and
4 Pin CAN Connector with sealing plugs.
Route the USB Cable to the front of the PWC for easy access when tuning.
Figure 9 – Waterproofing Kit for tuning.
STEP 7:
Re-install the splash cover over the ECU and patch harness.
Figure 10 – Splash cover re-installed
