ECU Connection Table
34 Pin Connector
Installation
Installing the Haltech Elite Yamaha PWC kit into your PWC is simple.
Installation notes are based on a new installation in conjunction with the
Haltech Plug and Play WBC1 Kit ( HT-010730)
STEP 1:
Using the mounting screws provided with your Elite ECU, mount the Elite
ECU to the mounting bracket included with the Haltech Plug and Play PWC kit.
If installing the optional haltech wideband kit feed the supplied 300mm cable ties
through the holes in the mounting bracket,leave approximately 70mm of cable tie
on the ECU side as shown below.
Do not
mount the WBC1 to the bracket at this time.
Figure 2 – Elite ECU Mounted to the custom PWC mounting bracket.
Note orientation of bracket and ECU.
1
2
3
4
5
6
10
11
12
13
14
18
27
19
20
21
22
26
28
29
30
31
15
16
17
23
24
25
7
8
9
32
33
34
34 Pin
1
2
3
4
5
6
10
11
12
13
14
18
8
19
20
21
22
26
16
17
24
25
15
23
7
9
Looking into the ECU
26 Pin
Figure 12- ECU Connector
