GX-505/GX-505VCD
GX-505/VCD
2
B, G, R, L, T models
B, G, R, L, T models
Laser Emitting conditions:
1) When the Top Cover is removed, and the STANDBY SW is turned to the "ON" position, the laser component will emit
a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may radiate through the
lens of the laser pick-up unit. Do not attempt any servicing during this period!
If no disc is detected, the laser will stop emitting the beam. When a disc is set, you will not be exposed to any laser
emissions.
2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory
prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this
manual. Adjustment of this control can increase the laser emission level from the device.
Laser Diode Properties
Material
: GaAlAs
Wavelength
: 780 nm
Emission duration
: Continuous
Laser output
: Max. 44.6
µ
W*
ANSI Class
: Class 1
* This output is the value measured at a distance of about
200 mm from the objective lens surface on the Optical Pick-
up Block.
VARO!
: AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTTÖMÄLLE
LASER-SÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
VARNING! : OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.
BETRAKTA EJ STRÅLEN.
Variable resistor
(Do not turn)
Optical pick-up
Содержание GX-505
Страница 4: ...GX 505 GX 505VCD GX 505 VCD GX 505 PANELS B G models U C R A models 3 ...
Страница 5: ...GX 505 GX 505VCD GX 505 VCD A model U C models R model B G models 4 ...
Страница 6: ...GX 505 GX 505VCD GX 505 VCD R T models L model GX 505VCD PANELS 5 ...
Страница 33: ...GX 505 GX 505VCD GX 505 VCD ANODE CONNECTION 32 RIGHT LEFT LEFT RIGHT BELOW UPPER RIGHT CENTER LEFT ...