Yamaha GRIZZLY 700 FI YFM7FGPX Скачать руководство пользователя страница 150 | Manualshive

Страница: 150 / 164

Yamaha GRIZZLY 700 FI YFM7FGPX Скачать руководство пользователя страница 150

8-65

8

Engine overheating

WARNING

EWB02290

Wait for the engine and radiator to cool before removing the radiator cap. You could be burned by
hot fluid and steam blown out under pressure. Always put a thick rag over the cap when opening.
Allow any remaining pressure to escape before completely removing the cap.

NOTE:

If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the rec-
ommended coolant as soon as possible.

Wait until the
engine has cooled.

Check the coolant level in the
reservoir and radiator.

The coolant level
is OK.

The coolant level is low.
Check the cooling system
for leakage.

Have a Yamaha dealer check
and repair the cooling system.

Add coolant. (See NOTE.)

Start the engine. If the engine overheats again, have a
Yamaha dealer check and repair the cooling system.

There is
leakage.

There is
no leakage.

U3B462E0.book Page 65 Tuesday, March 20, 2007 11:46 AM

«
...
148
149
150
151
152
...
»

Содержание GRIZZLY 700 FI YFM7FGPX





































































































































































Отзывы:

Нет отзывов