manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35FGW, Руководство пользователя, Страница: 72 / 138

Поделиться
Скачать
Yamaha GRIZZLY 350 YFM35FGW Скачать руководство пользователя страница 72

7-17

7

ground. The ATV could easily tip over backwards.
Apply both the front and rear brakes gradually, or
dismount the ATV immediately on the uphill side.

WARNING

EWB01791

Maintain a steady speed when climbing a hill.
If you lose all forward speed:

●

Keep weight uphill.

●

Apply the brakes.

●

Apply the parking brake after you are
stopped.

If you begin rolling backwards:

●

Keep weight uphill.

●

2WD: Never apply the rear brake while rolling
backwards. Apply the front brake. When fully
stopped, apply the rear brake as well, and
then lock the parking brake.

●

4WD: Apply both front and rear brakes grad-
ually. When fully stopped, lock the parking
brake.

Dismount on uphill side or to a side if pointed
straight uphill. Turn the ATV around and re-
mount, following the procedure described in
the Owner’s Manual.

RIDING DOWNHILL

When riding your ATV downhill, shift your weight
as far to the rear and uphill side of the ATV as pos-
sible. Move back on the seat and sit with your arms
straight. Engine compression will do most of the
braking for you. For maximum engine compres-
sion braking effect, change to 4WD before begin-
ning to descend the hill. Improper braking may
cause a loss of traction.
Use caution while descending a hill with loose or
slippery surfaces. Braking ability and traction may
be adversely affected by these surfaces. Improper
braking may also cause a loss of traction.

U5UH63E0.book  Page 17  Wednesday, April 26, 2006  9:21 AM

Содержание GRIZZLY 350 YFM35FGW











































































































































Отзывы:

Нет отзывов