Yamaha GRIZZLY 350 YFM35FGW Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 138

Yamaha GRIZZLY 350 YFM35FGW Скачать руководство пользователя страница 52

6-5

6

0–10 hours

Avoid prolonged operation above 1/2 throttle. Vary
the speed of the ATV regularly. Do not operate it at
one set throttle position.

10–20 hours

Avoid prolonged operation above 3/4 throttle. Rev
the engine freely, but do not use full throttle at any
time.

20 hours and beyond

The ATV can now be operated normally.

CAUTION:

ECB00220

If any engine trouble should occur during the
engine break-in period, immediately have a
Yamaha dealer check the ATV.

EBU20700

Parking

When parking the ATV, stop the engine, shift the
drive select lever into the forward position, apply
the parking brake, and then turn the fuel cock to
“OFF”.

EBU20760

Parking on a slope

WARNING

EWB00830

Avoid parking on hills or other inclines. Park-
ing on a hill or other incline could cause the
ATV to roll out of control, increasing the
chance of an accident. If you must park on an
incline, place the ATV transversely across the
incline, shift the drive select lever to the for-
ward position, stop the engine, apply the park-
ing brake, and then block the front and rear
wheels with rocks or other objects.

1. Parking brake lock plate

U5UH63E0.book Page 5 Wednesday, April 26, 2006 9:21 AM

«
...
50
51
52
53
54
...
»

Содержание GRIZZLY 350 YFM35FGW











































































































































Отзывы:

Нет отзывов