Yamaha GRIZZLY 350 YFM35FGW Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 138

Yamaha GRIZZLY 350 YFM35FGW Скачать руководство пользователя страница 27

4-5

4

EBU18170

Horn switch “

”

Press the switch to sound the horn.

EBU18211

On-Command four-wheel-drive switch
“2WD”/“4WD”

This ATV is equipped with a switch to change from
two-wheel drive to four-wheel drive and vice-versa.
Select the appropriate drive according to the ter-
rain and the conditions.

●

“2WD” (two-wheel drive): Power is supplied to
the rear wheels.

●

“4WD” (four-wheel drive): Power is supplied to
the rear and front wheels.

To change from two-wheel drive to four-wheel
drive, stop the ATV and push the switch in to the
“4WD” position.
To change from four-wheel drive to two-wheel
drive, stop the ATV and push the switch in to the
“2WD” position.

WARNING

EWB00161

Always stop the ATV before changing from
two-wheel drive to four-wheel drive and vice-
versa. The ATV handles differently in two-
wheel drive than in four-wheel drive in some
circumstances. Changing from two-wheel
drive to four-wheel drive or vice-versa while
moving may cause the ATV to unexpectedly
handle differently. This could distract the oper-
ator and increase the risk of losing control and
of causing an accident.

1. On-Command four-wheel-drive switch “2WD”/“4WD”

U5UH63E0.book Page 5 Wednesday, April 26, 2006 9:21 AM

«
...
25
26
27
28
29
...
»

Содержание GRIZZLY 350 YFM35FGW











































































































































Отзывы:

Нет отзывов