Yamaha Grizzly 300, Руководство пользователя

Страница: 99 / 146

8-27
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from the
spark arrester portion of the tailpipe and inside
of the tailpipe housing.
4. Check the gasket for damage, and replace it
if necessary.
6. Install the bolts and tighten them to the speci-
fied torque.
5. Install the gasket, and then insert the tailpipe
into the muffler and align the bolt holes.
1. Tailpipe
2. Spark arrester
3. Gasket
Tightening torque:
Tailpipe bolt:
12 Nm (1.2 m·kgf, 8.7 ft·lbf)
WARNING
Do not start the engine when cleaning the
spark arrester, otherwise it could cause injury
to the eyes, burns, carbon monoxide poison-
ing, possibly leading to death, and start a fire.
Always let the exhaust system cool prior to
touching exhaust components.
V-belt cooling duct check hose
If dust or water collects in the V-belt cooling duct
check hose, remove the hose and clean it.
1. V-belt cooling duct check hose
1
1
2
3
8