Yamaha Grizzly 300 Скачать руководство пользователя страница 94

Страница: 94 / 146

8-22

8. After draining the coolant, thoroughly flush the

cooling system with clean tap water.

9. Replace the coolant drain bolt washer if it is

damaged, install the coolant drain bolt, and
then tighten it to the specified torque.

Mix

10. Connect the coolant reservoir hose.
11. Pour the recommended coolant into the reser-

voir to the maximum level mark, and then
install the reservoir cap.

NOTICE:

1. Coolant reservoir hose

Tightening torque:

Coolant drain bolt:

12 Nm (1.2 m·kgf, 8.7 ft·lbf)

7. Disconnect the hose on the coolant reservoir

side, and then drain the coolant from the cool-
ant reservoir.

antifreeze with distilled water only. Howev-
er, if distilled water is not available, soft
water may be used for refilling. Do not use
hard water or salt water since they are
harmful to the engine.

12. Pour the recommended coolant into the radia-

tor until it is full.

Antifreeze/water mixture ratio:

1:1

Recommended antifreeze:

High-quality ethylene glycol antifreeze con-
taining corrosion inhibitors for aluminum en-
gines

Coolant quantity:

Radiator capacity (including all routes):

0.94 L (0.99 US qt, 0.83 Imp.qt)

Coolant reservoir capacity (up to the maxi-
mum level mark):

0.25 L (0.26 US qt, 0.22 Imp.qt)

Содержание Grizzly 300



















































































































































Результаты поиска

Содержание Grizzly 300

Отзывы:

Похожие инструкции для Grizzly 300

Бренды по названию

Популярные бренды

Yamaha Grizzly 300, Руководство пользователя

Результаты поиска

Содержание Grizzly 300

Отзывы:

Похожие инструкции для Grizzly 300

Бренды по названию

Популярные бренды